CyberData 011214 Spécifications télécharger pdf (Page 75)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

Note You must click on the Save button and then the Reboot button for the changes to take

effect.

Figure 2-31. Relay Status Section

Relay Status Note: The Relay Status section and settings (Figure 2-31) only

appear on the webpage when there is an associated door strike

relay.

Door Shows the status of the door.

Relay Shows the status of the remote relay.

Click on the Kick Remote Relay button to activate the remote

relay for a specified time. The time is equal to the DTMF

timeout.

Click on the Activate Remote Relay button to activate the

remote relay until the Deactivate Remote Relay button is

pressed.

Click on the Deactivate Remote Relay button to deactivate the

remote relay.

Click on the Refresh button to refresh the web page and

accurately display the status of the remote relay (active/inactive)

and door (open/closed).

Table 2-21. DSR Configuration Parameters (continued)

Web Page Item Description

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 118 119

Pas de commentaire

CyberData 011214 Spécifications Page 75