CyberData 011214 Spécifications télécharger pdf (Page 42)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

2. On the Button Configuration page, you may enter values for the parameters indicated in

Ta b l e 2-12.

Table 2-12. Button Configuration Parameters

Web Page Item Description

Dial Mode

Enable Telephone Operation Dial extensions like a normal telephone. Pressing the call

button will start a dial tone. Pressing the call button in a

call will cancel a call.

Enable Cellphone Operation Enter your extension and press the call button to start the

call. Press the call button again to cancel the call.

Enable Speed Dial Operation In speed dial mode every button can be configured to call

a different extension when pressed.

Enable Security Operation Security mode allows the user to secure the local or

remote relay by requiring a code (up to 8 digits) to be

entered into the device's keypad. The security codes may

be entered within a phone call to a preset extension or

independently.

If Allow Telephone Dialout is not enabled, the device

acts like a one button intercom. The Call Button will call a

preset extension specified on the web page and a user

can enter a security string directly into the keypad.

If Allow Telephone Dialout is enabled, the Call Button

will call the preset extension. Also, the user can either

press the # key to enter the security code or simply dial an

extension to make a phone call. While in security mode,

the local relay cannot be activated during ring, night ring,

button press, or call active. The Networked Door Strike

Relay cannot be activated during a ring or button press.

Security Mode Settings

Security Code 0 Up to eight digits using characters 0 through 9 and *.

Security codes start with the pound key (#) and will be