CyberData 011214 Spécifications télécharger pdf (Page 43)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

36

Security Code 5 Up to eight digits using characters 0 through 9 and *.

Security codes start with the pound key (#) and will be

recognized when the user stops pressing buttons or hits

the pound key again.

Security Code 6 Up to eight digits using characters 0 through 9 and *.

Security codes start with the pound key (#) and will be

recognized when the user stops pressing buttons or hits

the pound key again.

Security Code 7 Up to eight digits using characters 0 through 9 and *.

Security codes start with the pound key (#) and will be

recognized when the user stops pressing buttons or hits

the pound key again.

Security Code 8 Up to eight digits using characters 0 through 9 and *.

Security codes start with the pound key (#) and will be

recognized when the user stops pressing buttons or hits

the pound key again.

Security Code 9 Up to eight digits using characters 0 through 9 and *.

Security codes start with the pound key (#) and will be

recognized when the user stops pressing buttons or hits

the pound key again.

Activate DSR Activate a network attached relay instead of the relay on

the device.

Relay Activation Timeout The time in seconds to activate the relay when a security

code is entered. Up to five numerical digits.

Play Tone While Relay Active Play a tone when the relay is activated by a security code.

Allow Telephone Dialout When enabled, the user will be able to use the call button

to dial a pre-set extension, specified on the web page.

Call Button Dial this extension when the call button is pressed. Up to

64 characters.

ID Type the desired Extension ID. Up to 64 characters.

Security Code (0 through 9) Enter the desired security code number (7 character limit).

When a security code is entered on the keypad that

matches one of the seven-digit fields specified on the

page, the relay will be activated.

Speed Dial Settings

Speed Dial Timeout The amount of time you must hold the button before it calls

the configured extension. When this is set to 0 the phone

will dial the configured extension as soon as the button is

released.

Keypad 1 Dial this extension when the 1 key is pressed.

Keypad 2 Dial this extension when the 2 key is pressed.

Keypad 3 Dial this extension when the 3 key is pressed.

Keypad 4 Dial this extension when the 4 key is pressed.

Keypad 5 Dial this extension when the 5 key is pressed.

Keypad 6 Dial this extension when the 6 key is pressed.

Table 2-12. Button Configuration Parameters (continued)

Web Page Item Description

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 118 119

Commentaires sur ces manuels

Pas de commentaire