CyberData 011214 Spécifications télécharger pdf (Page 58)

Installing the VoIP Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930809M CyberData Corporation

2. On the Sensor page, enter values for the parameters indicated in Table 2-18.

Note The question mark icon (

) in the following table shows which web page items will be defined

after the To

ggle Help button is pressed.

Table 2-18. Sensor Configuration Parameters

Web Page Item Description

Door Sensor Settings

Door Sensor Normally Closed Select the inactive state of the door sensor. The door sensor is

also known as the Sense Input on the device's terminal block.

Door Open Timeout (in seconds) The time (in seconds) the device will wait before it performs an

action when the on-board door sensor is activated. The action(s)

performed are based on the configured Door Sensor Settings

below. Enter up to 5 digits.

Flash Button LED When selected, the Call button LED will flash until the on-board

door sensor is deactivated (roughly 10 times/second).

Activate Relay When selected, the device's on-board relay will be activated until

the on-board door sensor is deactivated.

Play Audio Locally When selected, the device will loop an audio file out of the

speaker until the door sensor is deactivated.

Make call to extension When selected, the device will call an extension when the on-

board door sensor is activated. Use the Dial Out Extension field

below to specify the extension the device will call.

Dial Out Extension Specify the extension the device will call when the on-board door

sensor is activated. Enter up to 64 alphanumeric characters.

Dial Out ID An additional Caller identification string added to outbound calls.

Enter up to 64 alphanumeric characters.

Play recorded audio When selected, the device will call the Dial Out Extension and

play an audio file to the phone answering the SIP call

(corresponds to Door Ajar on the Audiofiles page).

Intrusion Sensor Settings

Flash Button LED When selected, the Call button LED will flash until the intrusion

sensor is deactivated (roughly 10 times/second).

Activate Relay When selected, the device's on-board relay will be activated until

the intrusion sensor is deactivated.

Play Audio Locally When selected, the device will loop an audio file out of the

speaker until the intrusion sensor is deactivated.

Make call to extension When selected, the device will call an extension when the

intrusion sensor is activated. Use the Dial Out Extension field

below to specify the extension the device will call.

Dial Out Extension Specify the extension the device will call when the intrusion

sensor is activated. Enter up to 64 alphanumeric characters.

Dial Out ID An additional Caller identification string added to outbound calls.

Enter up to 64 alphanumeric characters.

Play recorded audio When selected, the device will call the Dial Out Extension and

play an audio file (corresponds to Intrusion Sensor Triggered

on the Audiofiles page) to the phone answering the SIP call

when the intrusion sensor is activated.

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 118 119

Commentaires sur ces manuels

Pas de commentaire

CyberData 011214 Spécifications Page 58

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte CyberData 011214