CyberData 011272 Spécifications télécharger pdf (Page 58)

Operations Guide 930853D CyberData Corporation

Installing the VoIP Flush-Mount Indoor Intercom

Intercom Setup

2.4.12 Configure the Autoprovisioning Parameters

Autoprovisioning can be used to configure your device automatically on boot, after a periodic delay,

after sitting idle for a period of time, or at a specified time.

The autoprovisioning file contains the board configuration in xml format. Autoprovisioned values in

this file will override values stored in on-board memory.

The autoprovisioning file can be hosted with a tftp or a web server and by default is named according

to the MAC address of the device (for example: 0020f7350058.config). The autoprovisioning

filename can also be specified.

The device does not have a real time clock but can sync with a network time server on boot.

1. Click the Autoprovisioning button to open the Autoprovisioning Configuration page. 

See Figure 2-26.

Figure 2-26. Autoprovisioning Configuration Page

CyberData Indoor Intercom

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 85 86

Pas de commentaire

CyberData 011272 Spécifications Page 58