CyberData 011272 Spécifications télécharger pdf (Page 31)

Operations Guide 930853D CyberData Corporation

Installing the VoIP Flush-Mount Indoor Intercom

Intercom Setup

2. On the Device Configuration page, you may enter values for the parameters indicated in

Ta b l e 2-7.

Table 2-7. Device Configuration Parameters

Web Page Item Description

Volume Settings

SIP Volume Type the desired SIP volume level into this field.

Multicast Volume Type the desired Multicast volume level into this field.

Ring Volume Type the desired Ring volume level into this field.

Sensor Volume Type the desired Sensor volume level into this field.

Microphone Gain Type the desired microphone gain level into this field.

No Volume Boost

Volume Boost 1

Volume Boost 2

Volume Boost 3

Normal operation of the product can be met with volume

levels 0 through 9. 0 being mute and 9 being the loudest

volume that in a normal arm's length and average

background noise, will enable full duplex operation and

give the best quality of sound output.

The volume boost options increase the output of the

speaker by:

3db for Boost level 1

6db for Boost level 2

9db for Boost level 3

If the user would like a higher output from the speaker, the

Boost settings are available. However, operation in Boost

Mode may overdrive or clip the audio if, for example, the

phone that is connected has a high microphone gain or if

the person has a loud voice talking too close to the

microphone.

The acoustic echo canceller also has a harder time

maintaining full duplex operation when in the Boost

Mode. The product may drop from full duplex operation

into half/duplex mode while in Boost Mode.

Contact CyberData support for additional information if

needed.

Relay Settings

Activate Relay with DTMF Code When selected, the relay can be activated with a DTMF

code.

DTMF Activation Code Type the desired DTMF activation code 

(25 character limit).

DTMF Activation Duration (in seconds) Type the desired DTMF activation duration (in seconds) (2

character limit [activation times now go up to 99 seconds]).

NOTE: A DTMF activation duration of 0 will toggle the

relay indefinitely or until the activation code is sent again

Play tone during DTMF Activation When selected, the device will play a tone when the relay

is activated with a DTMF code.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

CyberData 011272 Spécifications Page 31

Commentaires sur ces manuels

Produits connexes et manuels pour Interphones de porte CyberData 011272