CyberData 011186 Spécifications télécharger pdf (Page 45)

Installing the VoIP V3 Intercom

Configure the Multicast Parameters

Operations Guide 930472A CyberData Corporation

2. On the Multicast Configuration page, enter values for the parameters indicated in Table 2-14.

3. After changing the parameters, click on the Save button.

2.2.9.1 Assigning Priority

When playing multicast streams, audio on different streams will preempt each other according to

their priority in the list. An audio stream with a higher priority will interrupt a stream with a lower

priority.

If both SIP and Multicast is enabled, SIP audio streams are considered priority 4.5. SIP audio will

interrupt multicast streams with priority 0 through 4 and will be interrupted by multicast streams

with priority 5 through 9.

During priority 9 multicast streams the volume level is set to maximum.

Note SIP calls, multicast streams, ring tones, ringback tones, and nightring tones are all

prioritized.

Ringtones and

Nightringtones

Ringtones all play at the same priority level. This means that it is possible to have a nightring tone

and a normal ringtone playing at the same time.

Table 2-14. Multicast Configuration Parameters

Web Page Item Description

Enable Multicast Operation Enables or disables multicast operation.

Device Settings

Priority Indicates the priority for the multicast group. Priority 9 is the

highest (emergency streams). 0 is the lowest (background

music). SIP calls are considered priority 4.5. See

Section

2.2.9.1, "Assigning Priority" for more details.

Address Enter the multicast IP Address for this multicast group (15

character limit).

Port (range can be from 2000 to 65535) Enter the port number for this multicast group (5 character

limit).

Note: The multicast ports have to be even values. The

webpage will enforce this restriction.

Multicast Group Name Assign a descriptive name for this multicast group (25

character limit).

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

1 2 ... 40 41 42 43 44 45 46 47 48 49 50 ... 87 88

Pas de commentaire

CyberData 011186 Spécifications Page 45