CyberData 011186 Spécifications télécharger pdf (Page 61)

Installing the VoIP V3 Intercom

Configure the Autoprovisioning Parameters

Operations Guide 930472A CyberData Corporation

2.3 Upgrade the Firmware and Reboot the Intercom

To upload the firmware from your computer:

1. Retrieve the latest Intercom firmware file from the VoIP V3 Intercom Downloads page at:

http://www.cyberdata.net/products/voip/digitalanalog/intercomv3/downloads.html

2. Unzip the firmware version file. This file may contain the following:

• Firmware file

• Release notes

3. Log in to the Intercom home page as instructed in Section 2.2.3, "Log in to the Configuration

Home Page".

4. Click the Update Firmware button to open the Upgrade Firmware page. See Figure 2-25.

Figure 2-25. Upgrade Firmware Page

Caution

Equipment Hazard: V3 devices like the VoIP V3 Intercom cannot use firmware

6.x.x or earlier, and older V1 and V2 devices cannot use firmware 7.x.x or later.

GENERAL ALERT

1 2 ... 56 57 58 59 60 61 62 63 64 65 66 ... 87 88

Pas de commentaire

CyberData 011186 Spécifications Page 61