CyberData 011186 Spécifications télécharger pdf (Page 22)

Installing the VoIP V3 Intercom

RTFM Button

Operations Guide 930472A CyberData Corporation

2.1.6 RTFM Button

When the Intercom is operational and linked to the network, use the Reset Test Function

Management (RTFM) button (see SW1 in

Figure 2-7) on the Intercom board to announce and

confirm the Intercom’s IP Address and test that the audio is working.

Note You must do these tests prior to final assembly.

Figure 2-7. RTFM Button (SW1)

2.1.6.1 Announcing the IP Address

To announce a device’s current IP address:

1. Press and release the RTFM button (see SW1 in Figure 2-8) within a five second window.

Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default

to 10.10.10.10 if a DHCP server is not present).

Note Pressing and holding the RTFM button for longer than five seconds will restore the device

to the factory default settings.

Figure 2-8. RTFM Button (SW1)

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 87 88

Pas de commentaire

CyberData 011186 Spécifications Page 22