CyberData 011214 Spécifications télécharger pdf (Page 46)

Installing the VoIP V3 Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930522C CyberData Corporation

3. After changing the parameters, click the Save button.

Allow Telephone Dialout When the Allow Telephone Dialout option is enabled,

you can use the keypad to place calls to a dialed

extension. To call an extension, dial the number and wait.

You can still enter security codes with the Allow

Telephone Dialout option enabled by pressing the # key

before entering the code.

With the Allow Telephone Dialout option disabled, all

keypad input will be treated as security input. You can still

use the # key but it is not necessary.

For information about how to instantly triggering a dialout

call or security code, see

Section 2.4.7.2, "Triggering a

Dialout Call or Security Code".

Call Button Enter the desired dial-out extension number (64 character

limit). Security codes are limited to seven characters and

are activated with the # key.

Note: For information about dial-out extension strings and

DTMF tones, see

Section 2.4.7.1, "Dial Out Extension

Strings and DTMF Tones (using rfc2833)".

ID Type the desired Extension ID (64 character limit).

Security Code (0 through 9) Enter the desired security code number (7 character limit).

When a security code is entered on the keypad that

matches one of the seven-digit fields specified on the

page, the relay will be activated.

Misc Settings

Play Button Tone Check this box to hear a tone when a keypad button is

pushed. This setting applies to all modes and determines

whether the device will play an audible sound out of the

speaker when doing any of the following:

• Entering a security code

• Initiating a speed dial

• Pressing the keys in cellphone and telephone modes

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

Table 2-11. Button Configuration Parameters (continued)

Web Page Item Description

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 96 97

Pas de commentaire

CyberData 011214 Spécifications Page 46