CyberData 011214 Spécifications télécharger pdf (Page 35)

Installing the VoIP V3 Outdoor Intercom with Keypad

Intercom Setup

Operations Guide 930522C CyberData Corporation

3. After changing the parameters, click the Save button.

Click on the Test Microphone button to do a microphone

test. When the Test Microphone button is pressed, the

following occurs:

1. The device will immediately start recording 3 seconds of

audio.

2. The device will beep (indicating the end of recording).

3. The device will play back the recorded audio.

Click on the Test Relay button to do a relay test.

Click on the Test Relay button to do a button test. When

pressed, the button text will change to Stop Button Test

and in this mode, pressing the button will play test audio.

Also, pressing this button also puts the device into a mode

where it will play audio as the buttons are pressed. For

buttons 0-9 it will play the audio file for that number. For

buttons '*', '#', and the Call Button, it will play the

appropriate DTMF tones.

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

Table 2-8. Device Configuration Parameters (continued)

Web Page Item Description

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 96 97

Pas de commentaire

CyberData 011214 Spécifications Page 35