CyberData RAL 9003 Spécifications télécharger pdf (Page 20)

Installing the Singlewire-enabled Speaker

Device Configuration

Operations Guide 930320C CyberData Corporation

2.2.4 Confirm the IP Address, Test the Audio, and Check the Volume

2.2.4.1 Reset Test Function Management (RTFM) Switch

When the speaker is operational and linked to the network, use the Reset Test Function

Management (RTFM) switch (

Figure 2-10) on the speaker face to announce and confirm the

speaker’s IP Address, test that the audio is working, and check the volume.

Figure 2-10. RTFM Switch

To announce a speaker’s current IP address:

1. Press and release the RTFM switch within a five second window.

2. When you hear the IP address announcement, check the speaker volume.

Note The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or

default to 10.10.10.10 if a DHCP server is not present).

Note Pressing and holding the RTFM switch for longer than five seconds will restore the speaker

to the factory default settings.

RTFM switch

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 44 45

Pas de commentaire

CyberData RAL 9003 Spécifications Page 20