CyberData RAL 9003 Spécifications télécharger pdf (Page 17)

Installing the Singlewire-enabled Speaker

Device Configuration

Operations Guide 930320C CyberData Corporation

2.2.2 Installation Options

Figure 2-7 through Figure 2-8 illustrates various installation options for the Singlewire-enabled

Speaker.

2.2.2.1 Singlewire-enabled Speaker with Extra Speaker Connection

In Figure 2-7, the Singlewire-enabled Speaker supports an amplified audio output for a second

analog speaker. While the total speaker wattage is the same, by connecting a low cost analog

speaker, additional coverage can be realized.

Speaker Setup

When using the second speaker connection, the digital volume control needs to be set to less than

level 8 while making pages. Some adjustment of this value may be required depending on the

specific PoE switch.

Figure 2-7. Singlewire-enabled Speaker with Extra Speaker Connection

8 Ohm Analog Speaker

12 gauge wire and

a maximum length

of 20 feet

Speaker

AUX SPEAKER (-)

AUX SPEAKER (+)

GND

LINE OUT GND

LINE OUT (+)

+5 VDC

POWER GND

POWER IN +

(+12VDC 500mA)

J10

(Part #011120, RAL 9002)

(Part #011121, RAL 9003)

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 44 45

Pas de commentaire

CyberData RAL 9003 Spécifications Page 17