CyberData 011171 Spécifications télécharger pdf (Page 32)

Implementing the VoIP V3 Zone Controller

Configuring the VoIP Zone Controller

Operations Guide 930446E CyberData Corporation

2. On the Zone Configuration page, enter values for the parameters indicated

in Table 2-10.

3. After changing the parameters, click on the Save button.

4. Click Reboot for the new settings to take effect.

2.4.9.1 Operating the VoIP Zone Controller

To operate the VoIP Zone Controller:

1. Call to make a page. The VoIP Zone Controller will generate a tone over the phone.

2. When you hear this tone, enter the two-digit code for the group that you want to page.

Note If the Bypass DTMF setting is enabled, go to Step 4.

3. If the zone is valid, the VoIP Zone Controller will play the user-defined "good zone" sound. Go

Step 4.

Note If the zone is invalid, the VoIP Zone Controller will play the user-defined "bad zone"

sound. Repeat

Step 2.

4. When you hear the "good zone" tone, you can begin speaking.

Table 2-10. Zone Configuration Parameters

Web Page Item Description

Zones

Bypass DTMF When selected, the ports in Zone 00 will be paged without

waiting for DTMF entry.

Port 1 through Port 4 Checkboxes Check the box for the port(s) that comprise the zone.

Click the Save button to save your configuration settings.

Note: You need to reboot for changes to take effect.

Click on the Reboot button to reboot the system.

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 58 59

Pas de commentaire

CyberData 011171 Spécifications Page 32