CyberData 011305 Spécifications télécharger pdf (Page 39)

Operations Guide 930943A CyberData Corporation

Installing the VoIP Indoor Intercom

Configure the SIP Parameters

2.4.6.2 Point-to-Point Configuration

When the board is set to not register with a SIP server (see Figure 2-16), it's possible to set the

intercom to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The Intercom can

also receiv

e Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-16. SIP Configuration Page Set to Point-to-Point Mode

CyberData Indoor Intercom

Intercom is set to NOT register with a SiP server

VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 86 87

Pas de commentaire

CyberData 011305 Spécifications Page 39