CyberData 011209 Spécifications télécharger pdf (Page 41)

Installing the VoIP V3 Emergency Intercom

Configure the SIP Parameters

Operations Guide 930504F CyberData Corporation

2.11.6.2 Point-to-Point Configuration

When the board is set to not register with a SIP server (see Figure 2-23), it's possible to set the

intercom to dial out to a single endpoint.

In this case, the dial-out extension should be the IP address of the remote device. The Intercom can

also receive Point-to-Point calls. The delayed DTMF functionality is available in the Point-to-Point

Mode.

Note Receiving point-to-point SiP calls may not work with all phones.

Figure 2-23. SIP Configuration Page Set to Point-to-Point Mode

Intercom is set to NOT register with a SiP server

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 85 86

Pas de commentaire

CyberData 011209 Spécifications Page 41