CyberData 011123x Spécifications télécharger pdf (Page 23)

Operations Guide 930370M CyberData Corporation

Installing the VoIP Indoor Intercom with Keypad (Flush-Mounted)

Parts List

2.2.6 RTFM Button

When the Intercom is operational and linked to the network, use the Reset Test Function

Management (RTFM) button (see SW1 in

Figure 2-8) on the Intercom board to announce and

confirm the Intercom’s IP Address and test that the audio is working.

Note You must do this test prior to final assembly.

Figure 2-8. RTFM Button

2.2.6.1 Announcing the IP Address

To announce a device’s current IP address:

1. Press and release the RTFM button (SW1) within a five second window.

Note The device will use DHCP to obtain the new IP address (DHCP-assigned address or default

to 10.10.10.10 if a DHCP server is not present).

Note Pressing and holding the RTFM button for longer than five seconds will restore the device to

the factory default settings.

RTFM

1 2 ... 18 19 20 21 22 23 24 25 26 27 28 ... 85 86

Pas de commentaire

CyberData 011123x Spécifications Page 23