CyberData Part #010861 Manuel d'utilisateur télécharger pdf (Page 15)

Installing the VoIP Loudspeaker Amplifier

Loudspeaker Amplifier Setup

VoIP Loudspeaker Amplifier Operations Guide 930106C CyberData Corporation

See Table 2-5 for details about connecting the loudspeaker amplifier.

2.2.3.1 Loudspeaker Type

The CyberData VoIP Loudspeaker Amplifier supports an 8 Ohm Bogen or equivalent unamplified

loudspeaker. See

Figure 2-4.

Figure 2-4. Hornspeaker

2.2.3.2 Cabling/Wiring

You may connect a loudspeaker to a loudspeaker amplifier with a good quality speaker cable that is

limited to 25 feet in length.

Table 2-5. Loudspeaker Amplifier Connections

Connection Connection Details Location

Loudspeaker

● Use two binding posts for up to 0.083 inch

diameter loudspeaker wire.

VoIP paging amplifier

Ethernet

● Use a RJ 45 cable.

VoIP paging amplifier

a.Consult a licensed electrician for local electrical code requirements.

● For a phase connection, use a press-down

connector for 14 AWG solid copper wire.

● For a neutral connection, use a press-down

connector for 14 AWG solid copper wire.

● For an earth/ground connection, use a screw-

down connector for 14 AWG solid copper wire.

AC panel

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 43 44

Pas de commentaire

CyberData Part #010861 Manuel d'utilisateur Page 15