How To Find The IP Address
Quick Steps
1. To find this IP address download CyberData’s VoIP Discovery Utility program which allows
you to easily find and configure the default web address of the CyberData VoIP products.
CyberData’s VoIP Discovery Utility program is available at the following website address.
http://www.cyberdata.net/support/voip/discovery_utility.html
.
How To Find The MAC Address
Quick Steps
1. Login to the Web GUI of the device by putting the IP address of the device into your browser.
Login to the device when prompted. The factory default username is admin and the
password is also admin
2. Once logged in scroll to the bottom of the page and you should see the MAC and IP address
How To Set The Configuration Server
Quick Steps
1. Login to the Web GUI of the device by putting the IP Address of the device into your browser.
Login to the device when prompted. The factory default username is admin and the
password is also admin.
2. Once logged in click on the “Autoprovisioning” option on the left side.
3. Fill in the following information.
• Enable Autoprovisioning - Check the box
• Get Autoprovisioning from DHCP - Check the box
• Autoprovisioning Server (IP Address) - Define the IP address of your PBX in our
example this is 10.10.0.1
© Copyright Schmooze Com, 2012
4. Don’t forget to press the save and then reboot button at the bottom of
the page when done.
How To Factory Default
Quick Steps
1. Press and hold the Test/Reset switch while the unit beeps after one second and all indicator
lights on the front of the unit come on.
2. Continue to press the switch until after the indicator lights go off, and then release it. The
VoIP Paging Gateway settings are restored to the factory defaults.
The server http://10.10.0.223:80 requires a username
and password. The site says: CyberData VoIP Strobe.
User Name:
Password:
Cancel Log In
admin
••••
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels